**Special Order Item** ETA approximately 4-8 weeks.
For more information contact: 844.376.6333 | info@droneshopcanada.ca
Protected by DJI Care Enterprise support coverage.
The Mavic 3 Enterprise Series raises the bar an redefines industry standards for small commercial drones. The Mavic 3E takes mapping and mission efficiency to new heights with a mechanical shutter, a 56 zoom camera, and an RTK module for centimetre-level precision. For firefighting, search and rescue, inspection, and night operations, a thermal version is available.
Thanks to a compact, streamlined design, the Mavic 3 Enterprise series can be deployed instantly and is designed for pilots of all skill levels.
Recommended Add-Ons:
Key Features:
The Mavic 3E Wide camera has large 3.3m pixels that, when combined with the intelligent low-light mode, provide significantly improved performance in low-light or dim conditions.
The wide-angle 4/3 CMOS, 20MP sensor on the Mavic 3E has a mechanical shutter to prevent motion blur and supports 0.7-second interval shooting. Complete mapping missions with a high level of efficiency without the need for Ground Control Points.
Both the Mavic 3E and Mavic 3T are equipped with a 12MP Zoom Camera supporting up to 56x Max Hybrid Zoom to see important details from a distance.
Thanks to the next-generation O3 Enterprise transmission system with a quad antenna setup, the Mavic 3 Enterprise series can maintain a stable connection in many different scenarios. Depending on the area, the O3 Enterprise image transmission system is capable of up to a maximum of 15km of transmission distance.
With batteries optimized for endurance, 45-min flight durations allow you to cover more ground each mission, for surveying up to 2 square kilometres in a single flight. Max Flight Time: 45 Minutes. Surveying Area in a Single Flight: 2 square kilometres.
Fast charge batteries with 100W charging hub or charge the drone directly with 88W fast charging. Charging Hub: 100W, Aircraft 88W,
The Mavic 3 Enterprise series is equipped with a comprehensive obstacle avoidance system. Equipped with wide-angle lenses on all sides for omnidirectional obstacle avoidance with zero blind spots. Pilots can adjust proximity alarms and braking distance depending on mission requirements.
Advanced RTH automatically plans the optimal route home, saving power, time, and hassle.
APAS 5.0 allows for automatic route optimization around obstacles, allowing you to fly with confidence.
The Mavic 3 Enterprise series has RTK support, which means you can achieve centimeter-level accuracy thanks to the optional RTK Module and support for network RTK as well as the D-RTK 2 Mobile Station. This when combined with the mechanical shutter provides DJI TimeSync support which streamlines photogrammetry workflows by improving accuracy.
A redesigned Enterprise flight interface that is designed to boost pilot efficiency and flight safety. Drone and payload controls are easily accessible with a single tap. Together with support for various route types, clear presentation of flight details and navigational information improves user experience. The DJI Pilot 2 app also provides mission planning features to carry out various types of photogrammetry and mapping flights.
All-in-one cloud drone operations management for your fleet with support for live annotations and cloud mapping for seamless ground-to-cloud synergy. Efficiently manage inspection operations with route planning and mission management.
Full featured mapping software for all stages of work, from mission planning to processing of 2D and 3D models.
Analyze, annotate, and process images captured by M3T using DTAT 3.0 to detect temperature abnormalities in your inspections.
Local Data Mode | One-Tap Clear All Device Data | AES-256 Video Transmission Encryption | Cloud API
Similar to the Mavic 2 Enterprise series, the Mavic 3 Enterprise also supports a loudspeaker attachment which is redesigned for this new generation. It allows pilots to broadcast messages to assist with SAR applications. The loudspeaker supports recordings of messages as well as text-to-speech feature.
*Does not include RTK module*
Mavic 3 Enterprise Series include two models: M3E (Mavic 3 Enterprise) and M3T (Mavic 3 Thermal).
With RTK module and mechanical shutter, M3E can achieve centimeter-level mapping accuracy, which is a significant improvement compared to decimeter-level accuracy of the consumer Mavic 3 (No RTK and electronic shutter only). In addition, M3E uses DJI Pilot 2 app, which can be used for route planning and mission flight. Compared with the DJI Fly app, which is used to control consumer Mavic 3, Pilot 2 pilot has more enterprise features.
M3T integrates 640*512@30Hz thermal camera, which can be used for night patrol and abnormal temperatures detection, suitable for power grid inspection, solar farm inspection, search and rescue (SAR), firefighting, etc.
Regarding the camera specs, both M3E & M3T support 56x hybrid zoom, while Mavic 3 supports 28x hybrid zoom. The minimal photo interval of M3E wide camera is improved to 0.7 seconds, which significantly improves the mapping efficiency.
Mavic 3 Enterprise Series provide RTK, speaker and support both MSDK and PSDK for 3rd party software and hardware, which can meet the different types of requirements of enterprise users.
Longer Endurance and Higher Efficiency: M3E supports maximum 42min flight time (with RTK module), 15m/s flight speed and 0.7s minimum photo interval, while P4R supports maximum 30min flight time, 13m/s flight speed and 2.5s minimum photo interval. So, the M3E can complete over 2 square kilometers 2D mapping area in a single flight (GSD=5cm), which is 2 times that of the P4R. (When the GSD is smaller, the advantage of M3E is greater. When GSD=1cm, the efficiency of M3E is 7 times that of P4R.)
Better Photo Quality: The 4/3-inch CMOS sensor of M3E brings better colour reproduction and better noise reduction in low light.
Improved Flight Safety: M3E integrates Multiple wide-angle vision sensors which provides omnidirectional obstacle sensing. The flight is safer and more reliable.
More Stable Video Transmission: M3E incorporates O3 Enterprise video transmission technology, which offers maximum 15km (FCC standard) transmission distance and 1080P low-latency video.
The altitude limit is increased from 500 meters to 1500 meters, supports panoramic photography, and more powerful controller.
Longer endurance: M3E supports maximum 45min flight endurance, while M2EA supports maximum 31min flight time. The longer flight time of the M3T can greatly improve the operation efficiency in the inspection scenario.
Tele Camera: Compared to the M2EA which integrates wide and infrared camera, the M3E has an additional zoom camera that can be used for long-distance scouting.
Improved Flight Safety: M3T integrates Multiple wide-angle vision sensors which provides omnidirectional obstacle sensing. The flight is safer and more reliable.
More Stable Video Transmission: M3T incorporates O3 Enterprise video transmission technology, which offers maximum 15km (FCC standard) transmission distance and 1080P low-latency video.
Support FH2: Livestreaming, Coordinate synchronization, Media file sharing
M3E GCP-free accuracy is about 2 times that of GSD. For example, at 100m flight height, GSD=H/37=2.7cm, accuracy is within 5.4 cm.
M3E is suitable for surveying and mapping, power grid inspection, wind farm inspection, etc.
M3T is suitable for power grid inspection, solar farm inspection, SAR, firefighting, etc.
DJI Pilot2 and 3rd party app via MSDK.
Support MSDK, PSDK and Cloud API.
M3E/M3T: Foldable and compact design, easy to carry, entry-level enterprise drone.
M30/M30T: 16x optical zoom and LRF, IP55, powerful RC Plus, suitable for customers who have high requirements for the zoom performance, ingress protection and flight control experience.
M300 RTK: Supports mounting H20 series, P1, L1 and a variety of 3rd party payloads, suitable for customers who have high requirements for payload.
